Offsetting a Point in Trimble Fieldlink Software1. You will first need a point to offset, please refer to the “Creating a Point with Trimble Fieldlink” guide if needed 2. Click “Create” in the top left corner 3. Click “Point Manager” 4.

Setting up the Leica GPS Base/Rover Kit1. Power on the Base Station, Rover Receiver and Tablet2. Once everything is good to go, click “Devices” on the main menu screen3. Select “BASE”, then “Yes” when prompted4. It will say “Synchronizing”, then sele

Leica ICR50, iCR60, iCR70, iCR80 Robotic Total Station Kit Setup Guide1. Power on the Total Station and Tablet 2. Once the Leica Icon Software is opened up on the tablet, Click “Layout Points” 3. Click the Total Station icon at the bottom o

Trimble GCS900 GPS Machine ControlMake sure you have the Trimble equipment Machine Display - Trimble CB430 or CB460Receivers - Trimble MS990 , MS992, or MS995 AntennasTwo coil cablesSet the two antenna receivers (MS990 / MS992 / MS995) on top of t