Trimble Dual R10 GNSS Base/Rover Receiver Kit

This kit includes a set of Trimble R10 Receivers which are primarily used in the Surveying Trade. The R10 is a GPS Receiver in Trimble's line of R8 & R10 Base/Rovers and the kit also includes a Ranger 5 with Access Software. The internal radios are 410-470 MHz and will work with most Trimble Base and Rover Kits operating at the same frequency. This Trimble R10 Kit has just completed a thorough test by our technicians and includes a 30 Day Return and 90 Day Warranty. Please contact us at 360-571-2346 with any questions!

This Includes:

Trimble R10 Base/Rover Receivers

2 - Trimble R10 Base/Rover Receivers
   - Internal 410-470 MHz Rx/Tx Radios
   - GPS, GLONASS & SBAS Sats Enabled
2 - Trimble Dual Battery Chargers
4 - Lithium Ion Batteries
2 - Radio Antennas
2 - Quick Disconnect Adapters
2 - USB Data Cables
1 - Seco 0.25m Extension Rod
1 - 12v Power Cable w/ Alligator Clips
1 - Trimble Transport Case 

Spectra Ranger 5 Data Collector

   - Trimble Access Software Installed
   - Touchscreen w/ Stylus
1 - Rod Mounting Bracket & Clamp
1 - Ranger 5 Wall Charger
1 - Hard Transport Case

Satel Satelline-4Pro Base Radio

1 - Satelline - 4Pro 35W Radio
1 - Data Interface Cable Trimble
1 - Power Cable
1 - Whip Antenna, 5 dBi, NMO Connector
1 - Pole Mount Adaptor, NMO/TNC, 5/8-11 mounting thread
1 - Antenna Cable, 8ft, LMR-195, TNC Male
1 - Power Cable Set, Satel 35W to SAE & Fused SAE cable w/ battery leads

New Seco Fixed Tripod
New Seco Snap-Loc Rover Rod
New Seco Bipod
New Seco Radio Antenna Tripod
New Seco Snap-Loc Antenna Pole

Condition: This is all in great used condition with minor wear.